Kitchen Cabinets From Zero
Degrease, scuff-sand, prime with stain blocker, and spray a factory-smooth urethane enamel finish in six weekend parts.
Multi-part field guides that build a painting skill from zero. Each part teaches one step you can practice on a single wall or cabinet door this weekend.
Six ordered parts covering degreasing, oak grain filling, shellac priming, FFLP 310 tip selection, and curing 2K waterborne urethanes without a single brush mark.
Start the seriesDegrease, scuff-sand, prime with stain blocker, and spray a factory-smooth urethane enamel finish in six weekend parts.
Master the 3-pass ceiling bead, load a 9-inch microfiber sleeve properly, and roll walls floor-to-ceiling with zero lap marks.
Fix picture-hanger blowouts, peeling paper tape, and flashing patches so repairs disappear under eggshell paint.
Vacuum-sand, caulk without concave shrinkage, and lay glass-smooth waterborne alkyd on casings and 6-panel doors.
When to use shellac vs bonding vs oil-base primers so yellow oak knots and water rings never bleed through white topcoats.
Prime the pump, read tip numbers, eliminate finger-shaped edge tails, and flush your hose in 7 minutes flat.
One pro painting technique, one prep fix, one good read. Every Sunday.